Directed Electronics Automate 552 Manuel d'utilisateur télécharger pdf (Page 38)

shutdown diagnostics

The unit has the ability to report the cause of the last shutdown of the remote start system.

1. Turn the ignition off.

2. Press and hold the Valet/Program switch.

3. Turn the ignition on and then off.

4. Release the Valet/Program switch.

5. Press and release the Valet/Program switch.

The LED will now report the last system shutdown by flashing for one minute in the following grouped patterns:

The LED will stop flashing when the ignition is turned on.

LED FLASHES SHUTDOWN MODE

One System timed out

Two Over-rev shutdown

Three Low or no RPM

Four Transmitter Shutdown (or optional push-button)

Five (-) Shutdown

Six (+) Shutdown

Seven (-) Neutral safety shutdown (H3/6 BLACK/WHITE)

Eight Wait-to-start timed out

to enter diagnostic mode

1 2 ... 33 34 35 36 37 38 39 40 41 42

Pas de commentaire

Directed Electronics Automate 552 Manuel d'utilisateur Page 38