Directed Electronics Automate 552 Manuel d'utilisateur télécharger pdf (Page 11)

wiring the control unit

The wiring harness supplied with this unit is the standard 12-pin harness used by DEI® security systems. Three

wires in the plug are not used. The upgrade from this unit to a security system would simply require unplugging

and exchanging control units and connecting the necessary wires to the vehicle. The functions of all the wires

that are used in the primary harness are displayed in the following wiring diagram and their connections are

described in the wire connection guides.

primary harness (H1) wiring diagram

______

remote start ribbon harness wiring diagram

______

PURPLE (-) 200 MA STARTER RELAY TURN-ON

ORANGE (-) 200 MA ACCESSORY RELAY TURN-ON

PINK (-) 200 MA IGNITION RELAY TURN-ON

YELLOW (+) IGNITION INPUT TO REMOTE START

RED (+) CONSTANT POWER

RED/WHITE (-)200 MA CHANNEL 2 PROGRAMMABLE OUTPUT

RED (+) CONSTANT POWER INPUT

BROWN (-) HORN H0NK OUTPUT

NO WIRE

BLACK (-) CHASSIS GROUND INPUT

VIOLET NO FUNCTION

BLUE NO FUNCTION

GREEN NO FUNCTION

BLACK/WHITE (-)200 MA DOMELIGHT SUPERVISION OUTPUT

WHITE/BLUE (-) ACTIVATION INPUT

WHITE (+)/(-) SELECTABLE LIGHT FLASH OUTPUT

ORANGE (-) 500 MA ARMED OUTPUT

H1/1

H1/2

H1/3

H1/4

H1/5

H1/6

H1/7

H1/8

H1/9

H1/10

H1/11

H1/12

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 41 42

Pas de commentaire

Directed Electronics Automate 552 Manuel d'utilisateur Page 11