Directed Electronics 3200HS Manuel d'utilisateur télécharger pdf (Page 22)

22 GOSSEN Mueller & Weigert

Moving-Coil Movement with Power Converter, 90˚ Scale

Narrow Bezel per DIN 43718

Front Dimensions 96 x 96 mm 144 x 144 mm

Type LM 96 LM 144

Scale Length 97 mm 150 mm

Accuracy Class 1.5 1.5

Weight (standard model), Max. 0.8 kg 1.0 kg

Consumption, Approx.

Current Path 0.2 VA 0.2 VA

Voltage Path order no.: AB1/AB2/AB12/AB5/AB15 3.0 VA 3.0 VA

AB11 3.5 VA 3.5 VA

AB4/AB14 3.4 VA 3.4 VA

AB6 3.9 VA 3.9 VA

AB16 4.3 VA 4.3 VA

Nominal Line Voltage phase-to-neutral (= operating voltage) ≤300 V ≤300 V

3-phase 3-wire systems ≤500 V ≤500 V

3-phase 4-wire systems ≤277/480 V ≤277/480 V

Test Voltage 2.2 kV 2.2 kV

Front Housing-Panel Protection IP 52 IP 52

In preparation

Type LM 96

Square Panel Meters

for Active Power or Reactive Power

Technical Data

Description

Analog panel meter with core-magnet moving-coil movement and built in power

converter for active and reactive power.

Depending upon type of system and power, the power converter consists of one,

two or three multipliers. The multipliers function in accordance with the

TDM process (time division multiplier). The output signals from the multipliers are

added and fed to the moving coil mechanism.

Reference Conditions

Notes Concerning the Determination of Measuring Ranges

The upper measuring range value should be a standard value per DIN 43701:

1 − 1.2 − 1.5 − 2 − 2.5 − 3 − 4 − 5 − 6 − 7.5 − 8

and corresponding powers of ten.

The upper measuring range value must lie within a range of 0.5 to 1.2 times apparent

power.

Apparent power S is calculated from the primary values from the current and voltage

transformers:

where U equals phase-to-phase voltage

Display

Scale Graduation Coarse-ﬁne

Pointer Beam pointer with knife-edge

Mechanical Design

Housing Material Polycarbonate, self-extinguishing and drip-proof per UL94V-0

Mounting Fasteners Standard: S type screw clamp, except for:

Screw spindle for 144 x 144 mm panel meters

alternative:

• Subklew fasteners

(except for 144 x 144 mm panel meters)

Scale Interchangeable scales

➲ Scales may only be replaced under voltage-free conditions!

Replaceable Bezels and glass faceplates

➲ May only be replaced under voltage-free conditions!

Terminals M4 screw terminals with self-lifting terminal clips. Screws

can be turned with cross-head or standard screw drivers.

Terminal Designation per DIN 43807

Contact Protection Hand-safe full cover included

Reference Quantities Reference Conditions

Ambient Temperature 23°C ± 2°C

Position of Use control panel vertical ±1°

Frequency 45 Hz ... 65 Hz

50 Hz ±0.1 Hz for order no.: AB11

Current Components 20 ... 120% of rated value

Voltage Components 98 ... 102% of rated value

Warm-Up Time ≥5 min

Other DIN EN 60051

• Single-Phase AC S = U x I

• Three-Phase S = √3 x U x I

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 75 76

Commentaires sur ces manuels

Pas de commentaire

Directed Electronics 3200HS Manuel d'utilisateur Page 22

Commentaires sur ces manuels