Directed Electronics AutoCommand 28624TN Guide d'installation télécharger pdf (Page 72)

To active Panic Mode:

➤

Press and hold the button on the transmitter for 6

seconds

➤

The Horn/Siren output and light flash will activate for

45 seconds

To de-active Panic Mode:

➤

Press and release the button on the transmitter

➤

Arm or Disarm the alarm system

Zone Bypass Feature

The Zone Bypass feature temporarily bypasses alarm inputs that

trigger excessively when the system is armed while monitoring the

other inputs for triggers. This keeps constant triggers due to envi-

ronmental reasons from annoying the neighbors.

Protected entry bypass:

If the door, hood, brake or ignition inputs become activated

through 3 consecutive 30 second full trigger durations, it will be

bypassed until it has become inactive for more than 5 seconds.

Sensor bypass:

If one of the sensor inputs is triggered 3 times within 1 hour, a

bypass timer will begin and that input will be bypassed for 1 hour.

If a trigger occurs on that input while the bypass timer is active,

the bypass timer will reset.

You can Disarm and then Rearm the alarm to defeat the sensor

bypass at any time.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 78 79

Pas de commentaire

Directed Electronics AutoCommand 28624TN Guide d'installation Page 72