Directed Electronics AutoCommand 28624TN Guide d'installation télécharger pdf (Page 11)

H1 Harness - 6 pin connector

___

Pin # Color Note

H1/1

Yellow

Selectable positive or negative parking light output

H1/2

Brown/White

Use this wire if the vehicle is equipped with a

factory alarm. Connect to disarm wire listed on your

sheet.

H1/3

Violet

Connect this wire to supplied hood pin switch

H1/4

Orange

Connect this to wire in vehicle that shows 12 volts

when brake is pressed

H1/5

White/Black

Provides a ground during remote start. This wire is

normally connected to a bypass module if your

vehicle needs one.

H1/6

Red/White

This wire will start the vehicle when it sees two

negative pulses. Only used when incorporating into

existing alarm or for testing purposes.

RED/WHITE (-) remote start activation input

WHITE/BLACK (-) 400mA status output

ORANGE (+) brake switch shutdown input

VIOLET (-) hood pin shutdown input

BROWN/WHITE (-) factory disarm output

YELLOW (+/-) parking light output

HH11//11

HH11//22

HH11//33

HH11//44

HH11//55

HH11//66

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 78 79

Pas de commentaire

Directed Electronics AutoCommand 28624TN Guide d'installation Page 11