Directed Electronics VSS5000 Guide d'installation télécharger pdf (Page 2)

b. Plug the three

wire

cable

(P2)

into the black

3-pin Bitwriter

port

of

the Directed system.

CAUTION:

Be

careful

NOT

to plug this

P2

con-

nector into the white

Door

Lock

port

which also

accepts an identical 3-pin connector. Electrical

damage

will

occur

if

plugged into this port.

c.

Plug connector Pl into the SmartStart mod-

ule.

d.

When

power

is

connected, the module be-

gins an initialization procedure that

may

take several minutes. During this procedure,

progress

is

reported via the flashing

Amber/

Green

LED's

next to the P1 connector.

When

both

LED's

turn on solid, the initialization pro-

cedure

is

completed ISee

Status

LED's

for a

description

of

the various

LED

states).

4.

Re-verify security/remote start system operation:

Perform all basic operations such as Lock, Unlock,

Panic

and

Remote Start, ITrunk release where ap-

plicable) using the supplied remote control.

If

the

system operates as expected proceed to the next

step

15).

If the system does not operate as ex-

pected, rectify the problem first.

5.

Verify

and

Activate the DSM100:

The following steps need to be performed for the

Verification/Activation

of

the DSM100 Directed

SmartStart module.

a. Collect Customer Information:

Customer's

Full

Name:

Customer's Email Address:

Record/place

Module

ID

# here:

New

Account: 0 Existing Account: 0

If

this

is

an existing account,

are

you:

adding

a new system: 0

or

replacing an existing one: 0

b.

Log

on to:

www.directed.com/SmartStart

Additional

information can be

found at: www.directechs.com

2

and

click on the "Activate Your System" but-

ton.

c.

From the SmartStart Activate screen click on

the Installer link.

d. Enter username

and

password into fields

and

log in.

e. Select

and

click on the

appropriate

"device"

button. Fill in fields

and

follow

the onscreen

prompts.

f.

Test

the SmartStart system from the website

using the supplied function links.

g. Print the customer information

which

includes

their username

and

Air

ID. The customer

is

automatically notified

via

email,

which

con-

tains their secure password. They

will

enter

their username, email address

and

password

from the email into the

app

to activate

and

start controlling their vehicle.

Note: SmartStart response time can

vary

depend-

ing on cellular coverage

and

network congestion.

Status

LED's

Amber

LED

states:

•

Off:

No

cellular communication. Check

connections such as module harness Pl

jincluding

Dl).

• Flashing slowly: The module

is

seeking

cellular system communication.

If no cell coverage

is

available

the

Amber

LED

will

continue to flash slowly, move the

vehicle to a location with better recep-

tion.

• Flashing quickly: The module

is

negotiat-

ing with a cellular system.

•

On

solid: Communication successfully

es-

tablished.

Green

LED

states:

•

Off:

Communication not established with

the remote start main unit.

Check connection

at

the Bitwriter

port,

once connected

properly

the

LED

will

turn

on.

• Flashing: Active communication in prog-

ress

between the SmartStart module

and

Remote Start main unit.

•

On

solid: Communication successfully

es-

tablished with the remote start main unit.

Please return this

guide

and

printout from step

5g

to

the

owner

after successfully completing the installa-

tion as

it

contains details required for account setup.

E

LEe

T

RON

I C 5

©

2009

Directed Electronics.

All

rights reserved.

1 2 3 4 5 6 7 8 9

Commentaires sur ces manuels

Pas de commentaire