Directed Electronics Automate 210D Guide d'installation télécharger pdf (Page 16)

Connect the BLACK starter kill wires as shown below. Use one of

these wires as the starter kill input and the other as a starter kill

output wire (these wires are interchangeable).

step 5

Parking light flash

There are several different types of parking light circuits. The

following description is for a standard positive-triggered parking

light circuit, usually located at the light switch. If the web vehicle

information suggests a different type of parking light circuit,

please contact Rattler Technical Support.

Using the web information on the vehicle, locate the suspected

wire and place the BLACK lead of the meter to a ground and

secure it. Place the multi-meter in the DC position. Using the

RED lead of the meter, probe the wire. With the switch in the

off position the meter will read 0.00 volts. While watching the

meter, turn the switch to the parking light position. The meter

will read between 10.00 volts and 13.00 volts.

➜

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 54 55

Pas de commentaire

Directed Electronics Automate 210D Guide d'installation Page 16