Directed Electronics 20095 Guide d'installation télécharger pdf (Page 36)

5. Once the vehicle has started, it will run for the pre-program-

med period of time (either 12, 24, or 60 minutes - see

Programming Options section of this guide) or until a shut-

down input is triggered.

When you are ready to drive the vehicle:

1. Insert the ignition key and turn

it to the ON (not START) po-

sition.

2. Press the brake pedal.

While the vehicle is running during remote start operation, the

system will monitor the vehicle and will automatically shut

down the engine if the system receives any of the following shut-

down inputs:

➤ The brake pedal is pressed.

➤ The hood is opened.

➤ The shutdown toggle switch is put into the OFF position.

➤ The pre-programmed run time (12, 24, or 60 minutes) has

elapsed.

➤ Remote button is pressed twice within 3 seconds.

The LCD 2-way remote will generate a page notification with a

note: If the brake pedal is pressed before the key is in the

ON position, the engine will shut down.

iimmppoorrttaanntt!!

It is unsafe to operate a vehicle’s motor in a

garage or other closed off area. Breathing the exhaust

from the vehicle is hazardous to your health. Never acti-

vate the remote start in an enclosed space.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 56 57

Pas de commentaire

Directed Electronics 20095 Guide d'installation Page 36