Directed Electronics 554R Guide d'installation télécharger pdf (Page 41)

table of zones

A zone is represented by the LED flashes used by the system to

identify a particular type of input. Standard input assignments are

listed in the following table.

ZONE

(Number of

LED Flashes) DESCRIPTION

1 Instant trigger - hood pinswitch

2 Instant trigger - a heavier impact detected by the shock sensor

3 Door switch trigger

4 Instant trigger - for optional sensors

5 Ignition trigger

interpreting zone diagnostics

Warn Away responses are not reported by the arming or

disarming diagnostics. If you receive a Bypass notification when

arming or a Tamper Alert notification when disarming, look at

the LED or transceiver LCD. Active or triggered zones will be

indicated by a pattern of blinks by the LED or the transceiver

icon will indicate the triggered zone.

Example

If Zone 3 was active or triggered, the LED will blink three times

with a two-second pause. Then it will blink three times again,

and repeat until the ignition is turned on and the door icon (9)

will be displayed on the transceiver.

➜

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 52 53

Pas de commentaire

Directed Electronics 554R Guide d'installation Page 41