Directed Electronics VIPER 9252 Guide de l'utilisateur télécharger pdf (Page 11)

that the MTS mode is properly set when parking. If MTS mode is not

properly set or is defeated after being properly set the system will not

start the engine.

With the engine running and transmission in NEUTRAL position, 1.

set the parking brake and leave the engine running. All Doors

should be closed.

Release2. the foot brake (if pressed during Step 1), or press and

release the foot brake anytime. As long as the engine is running

there is no time limit to perform this step.

Within 20 seconds of foot brake release, 3. press the

button on

the remote, after 20 seconds return to Step 2.

The vehicle lights ﬂash 5 times to conﬁrm MTS mode enable and 4.

the remote start activates the ignition outputs.

Turn5. Off and remove the key from the ignition switch, the engine

remains running.

Exit6. the vehicle, close all the doors and lock the system.

The engine turns off after a few seconds. 7.

You can now remote start the vehicle. If a door is opened before

the next remote start activation, the system will not remote start the

vehicle.

To drive your automatic or manual transmission vehicle after it has

been remote started:

Get in without stepping on the brake. 1.

Insert the ignition key and turn it to the On position. 2.

Now, step on the brake. The remote start turns off. 3.

The vehicle is ready to drive. 4.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 40 41

Pas de commentaire

Directed Electronics VIPER 9252 Guide de l'utilisateur Page 11